Worked examples

Real numbers from the calculators, one example per module, so you can follow a result back to its inputs. The data are invented; the arithmetic is the engine’s.

• Junctra · Full example, interactiveA padded nozzle on a 1.8 m drumWRC 537 step by step: geometry parameters, pressure stress, the stress at eight points, and the VIII-2 checks. Change the inputs and re-run it on the page.Open the example
• Liftrix · In the method notesThe lift of a vertical vesselThe angle steps, the pick and tail loads, and the first lug check, with the default case worked by hand.Open the example
• Plenara · In the method notesA box checked to Appendix 13The E4.12.1 box through the sketch formulas, the ligament efficiency and the MAWP.Open the example
• Corix · In the method notesAn agitator nozzle on a top headTorque from power and speed, the stress cycles from speed and run hours, and the flange face deflection.Open the example